Radium Engineering 00-05 Honda S2000 Fuel Surge Tank Kit (FST Not Incl) - 20-0094
This comprehensive installation kit includes everything needed to install a Radium Engineering single pump. All Radium FSTs are CNC machined from aluminum and fully anodized and use PTFE insulated wiring, submersible hose, etc. to make them alcohol (ethanol/methanol/E85) compliant. The Honda S2000 install kit locates the FST in a hidden collision-safe area of the trunk behind the left seat using factory located threaded bosses. No modifications or drillling required. Because the S2000 is a small vehicle, please consider the decibels of the fuel pump selected.
The bolt-on powdercoated aluminum bracket mounts to existing OEM holes and features 3 rubber isolation mounting points to reduce fuel pump noise and vibration. Wiring components with flying leads featuring a weatherproof fuse and relay to drive the FST s fuel pump, is also included. Wiring is very simple and takes less than 30 minutes to assemble. No soldering is required.
Also included are 4 preassembled -6AN PTFE hoses which are great for all types of fuel including high alcohol contents, such as ethanol (E85). Unlike standard rubber hose, PTFE is non-permeable and eliminates any possible fuel vapor smell. These PTFE hoses use anodized aluminum hose ends are cut-to-length specifically for the 00-05 S2000 application. The inner stainless steel braid resists extreme fuel pressures and is covered with black PVC which gives the hose added protection from debris and provides abrasion protection.
Features:
- Preassembled 3/8" (-6AN) PTFE Hoses
- Powder Coated Mounting Bracket with Vibration Isolators
- AN and OEM Style Adapter Fittings
- Stainless Steel Hardware
- Installation Instructions
- Wiring Components with Relay and Fuse
- Honda S2000 2000-2005
- Pressure SHOULD be ~47.5psi constant
- Pictures used for marketing purposes only, actual product may vary.
This comprehensive installation kit includes everything needed to install a Radium Engineering single pump. All Radium FSTs are CNC machined from aluminum and fully anodized and use PTFE insulated wiring, submersible hose, etc. to make them alcohol (ethanol/methanol/E85) compliant. The Honda S2000 install kit locates the FST in a hidden collision-safe area of the trunk behind the left seat using factory located threaded bosses. No modifications or drillling required. Because the S2000 is a small vehicle, please consider the decibels of the fuel pump selected.
The bolt-on powdercoated aluminum bracket mounts to existing OEM holes and features 3 rubber isolation mounting points to reduce fuel pump noise and vibration. Wiring components with flying leads featuring a weatherproof fuse and relay to drive the FST s fuel pump, is also included. Wiring is very simple and takes less than 30 minutes to assemble. No soldering is required.
Also included are 4 preassembled -6AN PTFE hoses which are great for all types of fuel including high alcohol contents, such as ethanol (E85). Unlike standard rubber hose, PTFE is non-permeable and eliminates any possible fuel vapor smell. These PTFE hoses use anodized aluminum hose ends are cut-to-length specifically for the 00-05 S2000 application. The inner stainless steel braid resists extreme fuel pressures and is covered with black PVC which gives the hose added protection from debris and provides abrasion protection.
Features:
- Preassembled 3/8" (-6AN) PTFE Hoses
- Powder Coated Mounting Bracket with Vibration Isolators
- AN and OEM Style Adapter Fittings
- Stainless Steel Hardware
- Installation Instructions
- Wiring Components with Relay and Fuse
- Honda S2000 2000-2005
- Pressure SHOULD be ~47.5psi constant
- Pictures used for marketing purposes only, actual product may vary.
| Brand | Radium Engineering |
|---|