Walbro 450lph E85 Compatible Universal Fuel Pump & Installation Kit - TIA485-2
Whether you're upping the boost or stroking your block - more fuel is a MUST! Walbro Fuel Pumps are the industry standard for high performance fuel pumps regardless of make or model. Walbro Fuel Pumps provide unmatched performance, longevity and reliability - not to mention fuel delivery. From 190LPH to 255LPH, Walbro will make sure your best is fed! Trust only Walbro Fuel Pumps when it comes to your vehicle.
The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. Designed for E85 or Gasoline applications for high performance engines exceeding 750hp.
Features:
- Designed for engines with more than 750 HP
- Award-winning OE technology
- High-pressure, high-flow performance OEM technology designed and developed for E85 Ethanol
- Dual channel turbine design for maximum efficiency under high pressure and high temperature applications
- 465 lph @ 40 psi and 13.5V (14.1 amps) in gasoline
- Outlet diameter: 10mm (3/8")
- Diameter (upper body) 39mm
- Diameter (lower body) 50mm
- 400-0085 Install kit has been discontinued and replaced by 400-1168
- All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications
- Installation kit ( fuel strainer, fuel hose, harness pigtail, 2 clamps, 2 wire connectors )
- The F90000267 requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed.
- The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge.
- This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's 20 percent higher than conventional pumps.
Whether you're upping the boost or stroking your block - more fuel is a MUST! Walbro Fuel Pumps are the industry standard for high performance fuel pumps regardless of make or model. Walbro Fuel Pumps provide unmatched performance, longevity and reliability - not to mention fuel delivery. From 190LPH to 255LPH, Walbro will make sure your best is fed! Trust only Walbro Fuel Pumps when it comes to your vehicle.
The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades. Designed for E85 or Gasoline applications for high performance engines exceeding 750hp.
Features:
- Designed for engines with more than 750 HP
- Award-winning OE technology
- High-pressure, high-flow performance OEM technology designed and developed for E85 Ethanol
- Dual channel turbine design for maximum efficiency under high pressure and high temperature applications
- 465 lph @ 40 psi and 13.5V (14.1 amps) in gasoline
- Outlet diameter: 10mm (3/8")
- Diameter (upper body) 39mm
- Diameter (lower body) 50mm
- 400-0085 Install kit has been discontinued and replaced by 400-1168
- All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications
- Installation kit ( fuel strainer, fuel hose, harness pigtail, 2 clamps, 2 wire connectors )
- The F90000267 requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed.
- The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge.
- This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's 20 percent higher than conventional pumps.
| Brand | Walbro |
|---|