Chemical Guys Heavy Duty Water Spot Remover - 16oz - SPI10816

Water spots are the stains of mineral deposits left over after a drop of water evaporates. The specialty gel neutralizes alkaline stains with a mild acid, removing the stuck-on water stain or hard water spots quickly and effortlessly

Understanding Water Spots

Water spot damage begins as droplets of water land on paintwork and other automotive surfaces. As the water evaporates, all the mineral deposits inside the droplet are left behind as a stain on the surface. If caught soon enough, these mineral deposits can be simply wiped away during a car wash or with a quick detail spray. If left overnight, the spot may stick harder, but they can typically be removed with a clay bar. Beyond this level of contamination, water spots can etch deeper into the surface and cause permanent damage that may require polishing, wet sanding, and even repainting.

Instantly Removes Water Spots

Heavy Duty Water Spot Remover instantly erases alkaline water mineral stains from paintwork, glass, and polished metal surfaces. First wash away any abrasive dirt and debris particles from the surface with a car wash, quick detail spray, or waterless wash solution. Buff away any water spot gel residue, then neutralize the gel by rinsing clear with water or re-cleaning the area with a more detailed spray or waterless wash solution. Follow up with a coat of wax or sealant to help protect the surface from future water spot contamination and etching.

Features:

• Removes water spot stains and build up from paint, glass and metal
• Neutralizes water spot stains for effortless removal
• Permanently removes stuck-on hard water spots in seconds
• Prepares surface for wax protection against future spots
• Restore glass smooth feeling on glossy surfaces

• Applicable Materials: Painted Surfaces
• Applicable Locations: Exterior Paint Exterior Glass
• Car Finishes: Gloss
• Product Form: Gel
• Application Type: Spout

1. Work out of direct sunlight for best results.
2. Clean area to remove any loose dirt, debris, or abrasive contamination.
3. Work 3-5 dots of Heavy Duty Water Spot Remover over 2' x 2' area with a microfiber applicator.
4. Re-clean the area with plenty of water, quick detail spray, or waterless wash solution to neutralize the gel.
5. Wax or seal the area to help prevent future contamination and water spot etching.

• Always try a test spot before use. This product is not recommended for mirrors.