Mishimoto 2018 - 2020 Subaru Crosstrek Baffled Oil Catch Can Kit - Black - MMBCC-XTK-18P

The 2018-2019 Subaru Crosstrek is one of the most versatile vehicles on the market today. It's an efficient grocery hauler, comfortable daily driver, and capable off-road adventure seeker. Like most Subarus, the Crosstrek was built to go the distance with its time-tested 2.0L flat-four FB20D engine, but the second-generation Crosstrek received an efficiency update that could threaten its longevity. Direct injection lets the 2018-2019 Crosstrek sip fuel and crank out 33 mpg, but it also leaves the FB20D's intake valves vulnerable to carbon. As blow-by flows over the intake valves, oil and carbon deposits can build up, impeding airflow and eventually preventing the valves from closing. This blow-by can also cause knock that could result in catastrophic failure of the engine. The best way to treat this carbon buildup is to prevent it, and that's where this Mishimoto 2018-2019 Subaru Crosstrek direct-fit baffled oil catch can kit comes in. This Mishimoto catch can kit diverts blow-by away from the intake and traps it in our catch can. Inside the can, a set of air turbulators and baffles separate fuel, oil, and water vapors from the crankcase gasses and collects them to be drained next time you change your oil. By not returning the blow-by to your oil pan, our kit prevents fouling of the oil that could reduce its effectiveness, leading to accelerated engine wear. Finally, a sintered bronze filter removes any remaining carbon from the crankcase gases so that only clean air returns to your intake. If you want to keep your grocery-getting, daily-driven adventure seeker on the road for a long time to come, now is the time to protect it from carbon buildup. Like all of our Subaru products, this 2018-2019 Crosstrek catch can kit is backed by our Mishimoto Lifetime Warranty for a lifetime of protection.

Features:

• Direct fit for 2018-2019 Subaru Crosstrek XV & 2017-2019 Impreza 2.0L
• Protects intake valves from power-robbing carbon buildup
• Helps prevent knock that could lead to ringland failure
• Catch can captures blow-by, preventing it from fouling the engine oil
• Installs in under an hour
• Abrasion guard on lines prevents wear and vacuum leaks
• Direct-fit bracket mounts the catch can away from engine vibration
• Sturdy 3mm-thick steel brackets withstand rough roads and off-road abuse
• Filters and can are fully serviceable
• Patent #US D884,760 S
• Mishimoto Lifetime Warranty

• (1) Direct-Fit Mounting Bracket
• (1) 3 fl oz Black, Anodized 6061 Aluminum Catch Can
• (2) CNC-Machined Aluminum Barbed Fittings
• (2) Hoses w/ Pre-Installed Abrasion Guard
• (4) Worm Gear Clamps
• Mounting Hardware
• Mishimoto Lifetime Warranty

• Inlet: 3/8
• Outlet: 3/8
• Capacity: 3 fl. oz.
• Install Torque Specs: 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

• Engine Codes
  • FB20D
• Chassis Codes
  • GT
• Fits
  • 2018-2019 Subaru Crosstrek XV 2.0L
  • 2017-2019 Subaru Impreza 2.0L

• After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.