Haltech NEXUS R3 VCU - HT-193000
If you've been looking at the Nexus R5 and thinking it might be a bit of an overkill for your build ? we've got some good news for you! The Nexus family of products is about to get a new member?
Much like its bigger brother, the new Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller and a state-of-the-art engine management system in one compact yet powerful device. With a small footprint and sharing a lot of powerful tuning features with the R5, the new R3 will provide an integrated vehicle control solution to racers, tuners, engine builders and performance enthusiasts alike.
Features:
- A data logger
- A power distribution module
- A wideband controller
- A high speed wi-fi communications module
- A new generation engine management system All natively interconnected with each other.
- All programmable with one single piece of software.
OUTPUTS
- Ignition: 8
- Injector (peak and hold): 8
- Digital Pulsed Outputs (DPO): 6
- Power for Ignition Switch: 1
- 8A Outputs: 6
- 25A High Current Outputs (25A HCO): 4
INPUTS
- Analog Voltage Inputs (AVI): 11
- Differential Engine Position Inputs: 2 (Trigger and Home)
- Synchronised Pulsed Inputs (SPI): 6
- Knock Inputs: 2
- On-board Wideband Controller (NTK/LSU 4.9): 1
- Ignition Switch Input: 1
- CAN Bus Networks 1000, 500 or 250 kbit/s: 2
- High Speed USB 2.0 (USB-C interface): 1
- On-board Wi-Fi: YES
- Onboard Data Logging: 128MB
- Inertial Measurement Sensor Onboard: 6 Axis
- Oscilloscope: 4 Channel
- 5V Sensor Supply: 1
- 8V Sensor Supply: 1
- Sensor Ground: 1
- Drive-By-Wire Throttle Support: 2
- Flex Fuel: YES
- Closed Loop O2 Control: Dual Bank
- Knock Control:Dual
- Variable Cam Control: Up to 4
- Long Term Learning: Up to 4D
- Data LoggingLaptop + Onboard
- Anti-Lag Rotational Idle: YES
- Launch Control: YES
- Traction Control: YES
- Tuning Table Resolution: 32 x 32 x 8 4D
- Engine Protection: Multi Level
- CAN Networks: 2
- Nitrous Control: 6 Stages
- Boost Control: 4D Closed Loop
- Intake Air Bleed Control: YES
- Flat Shift Control: Open/Closed Loop
- Shock Travel and Ride Height: YES
- Trans Brake: YES
- Race Timer: YES
- Driveshaft and Engine RPM Targetting: YES
If you've been looking at the Nexus R5 and thinking it might be a bit of an overkill for your build ? we've got some good news for you! The Nexus family of products is about to get a new member?
Much like its bigger brother, the new Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller and a state-of-the-art engine management system in one compact yet powerful device. With a small footprint and sharing a lot of powerful tuning features with the R5, the new R3 will provide an integrated vehicle control solution to racers, tuners, engine builders and performance enthusiasts alike.
Features:
- A data logger
- A power distribution module
- A wideband controller
- A high speed wi-fi communications module
- A new generation engine management system All natively interconnected with each other.
- All programmable with one single piece of software.
OUTPUTS
- Ignition: 8
- Injector (peak and hold): 8
- Digital Pulsed Outputs (DPO): 6
- Power for Ignition Switch: 1
- 8A Outputs: 6
- 25A High Current Outputs (25A HCO): 4
INPUTS
- Analog Voltage Inputs (AVI): 11
- Differential Engine Position Inputs: 2 (Trigger and Home)
- Synchronised Pulsed Inputs (SPI): 6
- Knock Inputs: 2
- On-board Wideband Controller (NTK/LSU 4.9): 1
- Ignition Switch Input: 1
- CAN Bus Networks 1000, 500 or 250 kbit/s: 2
- High Speed USB 2.0 (USB-C interface): 1
- On-board Wi-Fi: YES
- Onboard Data Logging: 128MB
- Inertial Measurement Sensor Onboard: 6 Axis
- Oscilloscope: 4 Channel
- 5V Sensor Supply: 1
- 8V Sensor Supply: 1
- Sensor Ground: 1
- Drive-By-Wire Throttle Support: 2
- Flex Fuel: YES
- Closed Loop O2 Control: Dual Bank
- Knock Control:Dual
- Variable Cam Control: Up to 4
- Long Term Learning: Up to 4D
- Data LoggingLaptop + Onboard
- Anti-Lag Rotational Idle: YES
- Launch Control: YES
- Traction Control: YES
- Tuning Table Resolution: 32 x 32 x 8 4D
- Engine Protection: Multi Level
- CAN Networks: 2
- Nitrous Control: 6 Stages
- Boost Control: 4D Closed Loop
- Intake Air Bleed Control: YES
- Flat Shift Control: Open/Closed Loop
- Shock Travel and Ride Height: YES
- Trans Brake: YES
- Race Timer: YES
- Driveshaft and Engine RPM Targetting: YES
| Brand | Haltech |
|---|---|
| upc | 9356450011747 |