ICON 2020+ Jeep Gladiator JT 2.5in Stage 3 Suspension System - K22103

The Stage 3 ICON 2.5" Suspension System for the Jeep Gladiator is the ideal setup for significantly improving on-road ride quality for the daily driven application that will see occasional moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5" lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35" tire. For those looking to run a 37" tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).

View Installation Instructions

Features:

• 2.5" lift height
• Fits 35" tires (37" with extended bump stop spacer kit)
• 33% front, 23% rear increase in wheel travel
• Improves on and off-road ride quality over stock
• Front lower links included for caster angle correction and improved front end articualtion
• Dual rate front coil springs with lifetime guarantee against sagging/breakage
• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
• 2.0 Aluminum Series shocks with vehicle specific valving
• Adjustable, billet aluminum front sway bar links
• 100% bolt-on system makes for an easy install
• ICON 1K" tested under rigorous off-road conditions to validate tune, performance, strength, and durability

• Add-On Part: 22071 - 20-UP JT EXTENDED BUMP STOP SPACER KIT
• Add-On Part: 22042 - 20-UP JT / 18-UP JL / 07-18 JK FRONT HYD BUMP STOP KIT
• Bushings Included: Yes
• Coil Spring End 1 Type: Open
• Coil Spring End 2 Type: Open
• Coils Quantity Front: 2
• Coils Quantity Rear: 2
• Grade Type: Performance
• Maximum Lift: 2.5 IN
• Mounting Hardware Included: Yes
• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit part # 22071)
• Recommended Aftermarket Wheels: ICON Alloys | 17x8.5 w/ 4.5" Backspace / -6mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 18x9 w/ 4.5" Backspace / -12mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 20x9 w/ 4.5" Backspace / -12mm Offset
• Shocks Included: Yes
• Spring Color: Black
• Spring Material: Steel

• Will Not Fit Gladiator Mojave Trim
• Shocks Are Fully Serviceable
• An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength
• Oem Wheels & Tires Fitment: Yes
• Ships In Multiple Boxes
• Diesel Models Will Net Approx. 1.75" Of Front Lift Over Stock Due To Their Heavier Weight.
• Icon'S Advertised Lift Heights Are Based Around A Typical Jeep Jt Build Which Usually Includes Added Weight Of Accessories Such As Heavier Front Bumper/Winch. Lift Heights May Be Higher Than Advertised If Installed On A Stock Weighted Vehicle.

• Jeep Gladiator Overland Pentastar 2020-2022
• Jeep Gladiator Sport S Pentastar 2020-2022
• Jeep Gladiator Sport Pentastar 2020-2022
• Jeep Gladiator Rubicon Pentastar 2020-2022
• Jeep Gladiator Launch Edition 2020-2020
• Jeep Gladiator Altitude 2020-2020
• Jeep Gladiator Overland Eco 2021-2022
• Jeep Gladiator Willys Eco 2021-2022
• Jeep Gladiator High Altitude Pentastar 2021-2022
• Jeep Gladiator Rubicon Eco 2021-2022
• Jeep Gladiator Willys Sport Eco 2021-2022
• Jeep Gladiator Sport S Eco 2021-2022
• Jeep Gladiator Willys Sport Pentastar 2021-2022
• Jeep Gladiator High Altitude Eco 2021-2022
• Jeep Gladiator Sport Eco 2021-2022
• Jeep Gladiator Willys Pentastar 2021-2022
• Jeep Gladiator 80th Anniversary Eco 2021-2021
• Jeep Gladiator 80th Anniversary Pentastar 2021-2021