ICON 2023 Toyota Sequoia 1.75-4in Stage 1 Suspension System - K53231

ICON is excited to announce our full range of complete suspension systems and components for the new 2023 Toyota Sequoia. Most of the individual components carry over from the new Tundra, but a Sequoia-specific dual rate rear coil spring is being added: 23 Sequoia 3" Dual Rate Rear Spring Kit.

Stage 1 is ICON's entry level performance suspension system for 2023 Sequoia, providing improved on- and off-road performance as well as lift and leveling for a proper stance and fitment of up to 35" tires. This system features the innovative new 2.5 EXP series coilover shocks and swaybar drop kit for the front of the truck along with our Dual Rate Coil Springs and 2.0 Nitrogen Charged Monotube Shocks with Internal Reservoirs for the rear.

Kit Includes:

• 2 QTY 22-23 Tundra/23 Sequoia Front 2.5 EXP Coilover
• 1 QTY 22-23 Tundra/23 Sequoia Sway Bar Drop Kit
• 2 QTY 22-23 Tundra 0-1.5"/23 Sequoia 0-3" Rear 2.0 VS IR
• 1 QTY 23 Sequoia 3" Dual Rate Rear Spring Kit

• Toyota Sequoia 2023+

• 35X12.50 on 17x8.5" Wide Wheel w/ 5.75" Back Space

• Shocks are Fully Serviceable. Lift heights indicated are for a stock equipped vehicle.
• Advertised lift heights ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accesories will alter lift range.
• Not compatible with models equipped with load-leveling rear height control air suspension.
• Not compatible with TRD Pro.
• ICON does not recommend lifting above 2.25" (Tundra)/3.75" (Sequoia) Without an icon upper control arm, failure to do so can result in improper wheel alignment and cause damage to front axles on 4WD models.
• For 4WD models without TRD Off-Road Package ICON recommends using ICON diff drop (PART# 55156) or using Toyota TRD Axles (PART# 434200C020 DRIVER / 434100C020 PASS). Failure to do so could result in front axle damage. Not required for TRD Pro.