ICON 2023 Toyota Sequoia 3-4.5in Stage 4 Suspension System Tubular - K53234T

ICON is excited to announce our full range of complete suspension systems and components for the new 2023 Toyota Sequoia. Most of the individual components carry over from the new Tundra, but a Sequoia-specific dual rate rear coil spring is being added: 23 Sequoia 3" Dual Rate Rear Spring Kit.

Get up to 40% more travel versus stock! Stage 4 adds ICON's Billet or Tubular Upper Control Arms to squeeze every inch of travel out of the Tundra's suspension while increasing suspension lift height. ICON UCA's are optimized for lifted or leveled trucks, with caster adjustment built into the geometry of the arm, making it easier to dial in your truck's steering alignment. These UCA's feature ICON's proprietary Delta Joint Pro, which is fully serviceable and provides up to 90-degrees of movement to allow bind-free movement throughout the full range of suspension travel afforded by the ICON coilovers.

Kit Inclusions:

• 1 QTY 22-23 Tundra/23 Sequoia 2.5 VS IR Coilover Kit
• 1 QTY 22-23 Tundra/23 Sequoia Tubular UCA DJ Pro Kit
• 1 QTY 22-23 Tundra/23 Sequoia Sway Bar Drop Kit
• 2 QTY 22-23 Tundra 0-1.5"/23 Sequoia 0-3" REAR 2.0 VS IR
• 1 QTY 23 Sequoia 3" Dual Rate Rear Spring Kit

• Toyota Sequoia 2023+

• 35X12.50 on 17x8.5" Wide Wheel w/ 5.75" Back Space

• Shocks are Fully Serviceable. Lift heights indicated are for a stock equipped vehicle.
• Advertised lift heights ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accesories will alter lift range.
• Not compatible with models equipped with load-leveling rear height control air suspension.
• Not compatible with TRD Pro.
• For 4WD models without TRD Off-Road Package ICON recommends using ICON diff drop (PART# 55156) or using Toyota TRD Axles (PART# 434200C020 DRIVER / 434100C020 PASS). Failure to do so could result in front axle damage. Not required for TRD Pro.