ICON 23 Toyota Sequoia 3-4.5in Stage 6 Suspension System Tubular - K53236T

ICON is excited to announce our full range of complete suspension systems and components for the new 2023 Toyota Sequoia. Most of the individual components carry over from the new Tundra, but a Sequoia-specific dual rate rear coil spring is being added: 23 Sequoia 3" Dual Rate Rear Spring Kit.

To provide for sustained shock performance at speed through rough terrain, Stage 6 adds remote reservoirs to the ICON 2.5 front coilovers and 2.0 rear shocks. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.

Kit Inclusions:

• 1 QTY 22-23 Tundra/23 Sequoia 2.5 VS RR Coilover Kit
• 1 QTY 22-23 Tundra/23 Sequoia Tubular UCA DJ Pro Kit
• 1 QTY 22-23 Tundra/23 Sequoia Sway Bar Drop Kit
• 2 QTY 22-23 Tundra 0-1.5"/23 Sequoia 0-3" Rear 2.0 VS RR
• 1 QTY 23 Sequoia 3" Dual Rate Rear Spring Kit

• Toyota Sequoia 2023+

• 35X12.50 on 17x8.5" Wide Wheel w/ 5.75" Back Space

• Shocks are Fully Serviceable. Lift heights indicated are for a stock equipped vehicle.
• Advertised lift heights ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accesories will alter lift range.
• Not compatible with models equipped with load-leveling rear height control air suspension.
• Not compatible with TRD Pro.
• For 4WD models without TRD Off-Road Package ICON recommends using ICON diff drop (PART# 55156) or using Toyota TRD Axles (PART# 434200C020 DRIVER / 434100C020 PASS). Failure to do so could result in front axle damage. Not required for TRD Pro.