K&N 2016-2017 Ford Focus RS 2.3L Typhoon Short Ram Intake - 69-3539TB
The K&N 69-3539TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothens and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-3539TB air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs using the factory mounting locations. A molded scoop funnels outside air towards the filter. Air is then directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish to match the car's badging and it accommodates the factory air pressure sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Installation can be done using common tools. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Features:
- Air Box Included: No
- Air Filter Color: Red
- Air Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Washable: Yes
- CARB EO Number: D-269-70
- Clamp Color/Finish: Natural
- Clamp Material: Stainless Steel
- Clamp Style: Worm Gear
- Clamps Included: 3
- Coupler Color/Finish: Black
- Couplers Included: 1
- Estimated Horsepower Gain: 33.01 HP @ 4904 RPM
- Horse Power Increase: 33 HP
- Intake Pipe Color / Finish: Candy Blue Powder Coating
- Intake Pipe Material: Aluminum
- Intake Pipe Ports: All intake tube ports needed for the specified applications are included
- Mass Air Flow Sensor Adapter Included: No
- Mounting Hardware Included: Yes
- Oil Included: Yes
- Package Material: Corrugated
- Package Type: Box
- Product Style: 69 Series Typhoon Kits
- Replacement Filter: RU-5163
- RPM: 4904
- Street Legal In All US States: Yes
- System Type: Complete Cold-Air Intake System
- TUV Approved (Europe): No
- Warranty: No-Hassle Lifetime Limited
- Weight: 9.4 lb (4.3 kg)
- For Instructions CLICK HERE
- For Dyno CLICK HERE
The K&N 69-3539TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford Focus models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothens and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-3539TB air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs using the factory mounting locations. A molded scoop funnels outside air towards the filter. Air is then directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish to match the car's badging and it accommodates the factory air pressure sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Installation can be done using common tools. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Features:
- Air Box Included: No
- Air Filter Color: Red
- Air Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Washable: Yes
- CARB EO Number: D-269-70
- Clamp Color/Finish: Natural
- Clamp Material: Stainless Steel
- Clamp Style: Worm Gear
- Clamps Included: 3
- Coupler Color/Finish: Black
- Couplers Included: 1
- Estimated Horsepower Gain: 33.01 HP @ 4904 RPM
- Horse Power Increase: 33 HP
- Intake Pipe Color / Finish: Candy Blue Powder Coating
- Intake Pipe Material: Aluminum
- Intake Pipe Ports: All intake tube ports needed for the specified applications are included
- Mass Air Flow Sensor Adapter Included: No
- Mounting Hardware Included: Yes
- Oil Included: Yes
- Package Material: Corrugated
- Package Type: Box
- Product Style: 69 Series Typhoon Kits
- Replacement Filter: RU-5163
- RPM: 4904
- Street Legal In All US States: Yes
- System Type: Complete Cold-Air Intake System
- TUV Approved (Europe): No
- Warranty: No-Hassle Lifetime Limited
- Weight: 9.4 lb (4.3 kg)
- For Instructions CLICK HERE
- For Dyno CLICK HERE
| Brand | K&N |
|---|---|
| upc | 024844365255 |