Bilstein 10-22 Lexus GX460 / 03-22 Toyota 4Runner B8 5160 Series Rear Left 46mm Shock Absorber - 25-311211
Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.
46mm Monotube Shock Absorber
Features
- Extended Length (MM): 597.0
- Collapsed Length (IN): 14.50
- California Proposition 65: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
- Upper Mount Type: Stem
- Billet Reservoir Clamp Included: Yes
- Spring Seat Included: No
- Lower Mount Type: Eye 19.25mm
- Reservoir: Yes
- Series: B8 5160
- Boot Included: Black Bellows
- Extended Length (IN): 23.50
- Body Diameter (ID): 46mm
- Adjustable Damping: Non-Adjustable
- Collapsed Length (MM): 368.3
- Finish: Zinc Plated
- Title: Bilstein Shock Absorbers
- Internal Design: Monotube
- Body Design: Smooth Body (Non-Coilover)
Notes:
Fits position: Rear Left
Bilstein 10-22 Lexus GX460 / 03-22 Toyota 4Runner B8 5160 Series Rear Left 46mm Shock Absorber - 25-311211 aftermarket automotive part
This Bilstein B8 5160 Series rear left shock absorber is a direct-fit replacement component designed for lifted trucks and SUVs. It uses a monotube design with a remote reservoir to support cooling capacity and wheel travel compared with a traditional shock absorber.
SKU: bil25-311211. This shock features velocity sensitive digressive valve settings tuned for the specific application, plus a 360-degree swivel banjo hose fitting and billet reservoir mount (where applicable) for a clean, low-profile installation.
Key Benefits
- Direct-fit rear left shock solution for lifted trucks and SUVs.
- Remote reservoir helps increase cooling capacity during demanding driving conditions.
- Monotube internal design supports consistent, fade-free shock performance.
- Digressive valve settings are velocity sensitive and tuned per application.
- 360-degree swivel banjo hose fitting supports flexible reservoir positioning.
- Billet reservoir mount provides a clean, low-profile installation where applicable.
- Designed to increase overall durability for harsh off-road environments.
Specifications
- Position: Rear Left
- Series: B8 5160
- Reservoir: Yes
- Body Diameter (ID): 46mm
- Internal Design: Monotube
- Body Design: Smooth Body (Non-Coilover)
- Upper Mount Type: Stem
- Lower Mount Type: Eye 19.25mm
- Extended Length (IN): 23.50
- Extended Length (MM): 597.0
- Collapsed Length (IN): 14.50
- Collapsed Length (MM): 368.3
- Adjustable Damping: Non-Adjustable
- Finish: Zinc Plated
- Boot Included: Black Bellows
- Billet Reservoir Clamp Included: Yes
- Spring Seat Included: No
- California Proposition 65: WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
Built around a remote-reservoir monotube layout, this rear left shock absorber focuses on controlled damping and durability for lifted SUV and truck applications. The combination of tuned digressive valving, swivel hose fitting, and included reservoir clamp supports a tidy fitment while maintaining performance consistency in off-road use.
| Brand | Bilstein |
|---|