EBC 96-97 Lexus LX450 4.5 GD Sport Front Rotors - GD7480
- Upgrade your braking performance with EBC 96-97 Lexus LX450 4.5 GD Sport Front Rotors - GD7480 for smoother, safer stops.
- Designed for Lexus LX450 models, these front rotors reduce brake fade and improve control on rugged terrains.
- Enhance your off-road driving experience with durable GD Sport rotors that withstand tough conditions effortlessly.
- Experience reliable stopping power and increased safety—add to cart now and transform your vehicle’s braking system.
EBC 96-97 Lexus LX450 4.5 GD Sport Front Rotors - GD7480 aftermarket automotive brake rotor upgrade
These EBC GD Sport front brake rotors are designed for the front position on 96–97 Lexus LX450 4.5 applications. The GD pattern uses wider slots and blind drilled dimples intended to help degas the braking surface and clear away dirt, dust, and debris.
SKU: ebcGD7480. Wide aperture slots are used for cooling to reduce temperatures and help prevent brake fade. The Thermic Black finish provides a sleek look and is intended to help prevent corrosion.
Key Benefits
- Wider slots help degas pads and keep the braking area cleaner.
- Blind drilled dimples are designed to avoid stress cracks.
- Wide aperture slots support cooling to reduce rotor temperatures.
- Reduced temperatures help prevent brake fade during repeated braking.
- Thermic Black finish helps resist corrosion for longer rust resistance.
- Front-position rotor design matched to OE-style fitment requirements.
- Vented construction supports heat management in demanding driving conditions.
Specifications
- Position: Front
- Rotor diameter: 312 mm (12.3 in.)
- Centre hole diameter: 105 mm
- Height: 58 mm
- New thickness: 32 mm
- Minimum thickness: 30 mm
- Bolt holes/studs: 6
- PCD: 139.7 mm
- Solid or vented: Vented
- Style: OE
- Product group: GD Rotors
- Additional description: GD Pattern Rotors
Notes
- 12.3 in. Dia. Set of Two
- Fits position: Front
- DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT
- The Thermic Black coating does NOT need to be removed before install.
- Do NOT use brake cleaner or any other method to remove Thermic Black coating.
- Coating is removed in the pad swept area within the first 10 to 20 stops.
- Attempting to remove the coating is NOT covered under EBC warranty.
Built around EBC’s GD slot-and-dimple design, these rotors focus on cooling and surface cleaning to support consistent braking. The dimple drilling approach is intended to reduce the risk of stress cracking compared with through-drilling, while the Thermic Black coating provides an anti-corrosion layer for long-lasting rust resistance.
| Brand | EBC Brakes |
|---|