EBC 10-12 Lexus HS250h 2.4 Hybrid GD Sport Rear Rotors - GD7415
- Upgrade your braking performance with EBC 10-12 Lexus HS250h 2.4 Hybrid GD Sport Rear Rotors - GD7415 for smoother, safer stops.
- Designed for hybrid vehicles, these rear rotors reduce brake fade and improve overall driving confidence on every journey.
- Enhance your Lexus HS250h’s handling and durability with sport-grade rotors built to withstand aggressive driving conditions.
- Experience quieter braking and longer rotor life, ensuring a hassle-free ride and less frequent replacements.
- Boost your hybrid’s braking system today—add to cart now and feel the difference on your next drive.
EBC 10-12 Lexus HS250h 2.4 Hybrid GD Sport Rear Rotors - GD7415 aftermarket automotive replacement component
Designed for the rear position, these EBC GD sport rotors use wide slots and blind drilled dimples to help keep the braking surface cleaner while managing heat during repeated stops. The GD pattern supports degassing and helps move dirt, dust, and debris away from the pad contact area.
SKU: ebcGD7415. Finished in Thermic Black for corrosion resistance and a clean appearance, the coating is intended to wear from the pad-swept area during initial braking while remaining on non-contact surfaces.
Key Benefits
- Wide aperture slots support cooling to help reduce rotor temperatures.
- Helps reduce brake fade during repeated braking by improving heat management.
- Blind drilled dimples avoid stress cracking compared with full drilling.
- Slots and dimples help degas pads and clear dust and debris.
- Thermic Black finish helps prevent corrosion on non-swept rotor surfaces.
- OE-style, solid rear rotor design for direct replacement fitment.
Specifications
- Position: Rear
- Rotor diameter: 281 mm (11.1 in.)
- Centre hole diameter: 62 mm
- Height: 55 mm
- New thickness: 12 mm
- Minimum thickness: 10.5 mm
- Bolt holes/studs: 5
- PCD: 114.3 mm
- Solid or vented: Solid (S)
- Style: OE
Notes
- 11.1 in. Dia. Set of Two
- Fits position: Rear
- DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT
- The Thermic Black coating does NOT need to be removed before install.
- Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors.
- The Thermic Black coating will be removed in the pad swept area within the first 10 to 20 stops after installation.
- The Thermic Black coating is an anti corrosion coating for long resistance against rust.
- Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty.
These GD pattern rear rotors are intended for drivers seeking an OE-style replacement with added slotting and dimpled detailing to support cooling and surface cleanliness. Dimples are used in place of full drilling to help avoid stress cracking, while the Thermic Black finish provides corrosion protection where pads do not sweep.
| Brand | EBC Brakes |
|---|