Mishimoto 07-09 Nissan 350Z PCV-Side Catch Can Kit - MMBCC-350Z-07PBE

The VQ35HR is the ultimate evolution of the VQ35 series. The HR was built to be driven at the limit, but over a decade of daily driving and banging the limiter takes its toll. As the VQ35HR ages, it produces more and more blow-by, which makes its way back through the intake system and into the cylinders. More blow-by equals a higher chance of detonation, and the high-revving, high compression HR can't afford more risk. That's why Mishimoto has developed a baffled oil catch can for your VQ35HR-powered 2007-2009 Nissan 350Z or Infiniti.

Our complete kit utilizes two 6061-aluminum catch cans that mount in line with the VQ35HR's PCV and CCV systems for protection from idle to wide-open throttle. Blow-by is routed away from the intake and into our catch cans using direct-fit, chemical-resistant lines and CNC-machined aluminum fittings. Our cans are suspended in the engine bay by sturdy 3mm-thick steel brackets that can withstand everything from dirt drops to potholes without flinching.

Inside the catch cans, air diverters and a baffle help condense oil, fuel, and water, while a 50-micron bronze filter further cleans crankcase gases before returning them to your intake. Like all our 350Z products, this baffled oil catch can kit for the 2007-2009 350Z VQ35HR is backed by our Mishimoto Lifetime Warranty for a lifetime of protection. So, whether you're hitting the track or the street, protect your VQ35HR with this Mishimoto baffled oil catch can kit.

Features:

• Direct fit for 2007-2009 Nissan 350Z with VQ35HR
• Dual-can system captures blow-by from both CCV and PCV systems
• Sturdy 3mm-thick steel brackets withstand rough roads and track abuse
• Modular brackets fit with stock engine cover and make servicing catch cans easy
• Includes pre-molded, stock-style hoses for simplified install
• Defends intake system, and essential engine components from oil blow-by
• Helps maintain proper octane levels to reduce risk of detonation
• CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can
• Includes aluminum T-connector for use with aftermarket intakes
• Filters and cans are fully serviceable
• Mishimoto Lifetime Warranty

• (2) Black Anodized Aluminum Baffled Oil Catch Cans
• (4) Application-Specific Mounting Brackets
• (5) Direct-Fit Hoses, Black
• (1) Aluminum T-Fitting
• (11) Worm Gear Clamps
• (4) CNC-machined Aluminum Barbed Fittings
• Mounting Hardware
• Mishimoto Lifetime Warranty

• Material: 6061 Aluminum
• Install Torque Specs: 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
• Color: Black

• Engine Codes
  • VQ35HR
• Fits
  • Please note: fitment has not been verified on Infiniti models
  • 2007-2009 Nissan 350Z w/ VQ35HR
  • 2007-2008 Infiniti G35 w/ VQ35HR
  • 2008-2012 Infiniti EX35 w/ VQ35HR
  • 2009-2012 Infiniti FX35 w/ VQ35HR
  • 2009-2010 Infiniti M35 w/ VQ35HR

• After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.