Mishimoto 21+ Bronco 2.7L Intercooler Pipe Kit Micro Wrinkle Black - MMICP-BR27-21MWBK
Please Request Quote for stock status
The Bronco is back, and with two powerful turbocharged engines, it was born to run free. The larger of the two EcoBoost engines, the 2.7L twin-turbo V6, cranks out 330 horsepower and 325 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn?t want more from their vehicle? We here at Mishimoto are never ones to settle for stock, so that?s why we?ve developed these performance intercooler pipes for your 2021+ Ford Bronco 2.7L EcoBoost.----Our intercooler pipes are constructed from cast and mandrel-bent aluminum for unsurpassed durability. Unlike the stock plastic pipes, our cast-aluminum hot-side Y-pipe and throttle body inlet provide superior resistance to cracking after thousands of heat cycles. For even more durability, we?ve replaced the factory rubber sections with mandrel-bent aluminum for significantly increased boost tolerance. Serrated coupler connections at the Y-pipe and throttle body ensure your boost stays where you want it under even the most extreme conditions.----But durability isn?t the only benefit these pipes offer. The Mishimoto performance intercooler pipes reduce restriction by up to 34.2-percent over the stock pipes. That increase in flow allows your Bronco to pull in more air for power gains of over 5 HP and 6.1 lb-ft. of torque on the stock tune.----If you?re ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, these Mishimoto Performance Intercooler Pipes are for you. And, like all Mishimoto products, they?re backed by our Lifetime Warranty, so you can drive easy knowing we?ve got you covered.
Performance Intercooler Pipe Kit, Fits Ford Bronco 2.7L EcoBoost 2021+
Features
- SellingPoint01: Direct fit for 2021+ Ford Bronco 2.7L EcoBoost
- SellingPoint02: Up to 34.2-percent less restrictive than stock pipes
- SellingPoint03: Dyno-proven power gains of 5.4 HP and 6.1 lb-ft. of torque on stock tune
- SellingPoint04: 2-1/4-inch to 2-1/2-inch hot-side piping and 2-3/4-inch cold-side piping
- SellingPoint05: Available with high-mount or stock location intercooler for improved cooling and power
- SellingPoint06: Constructed from durable cast and mandrel-bent aluminum for superior boost tolerance
- SellingPoint07: Serrated coupler connections ensure a secure fit under high boost pressures
- SellingPoint08: Precision CNC-machined components for exacting fit and performance
- SellingPoint09: Micro-wrinkle black powder coat adds stealthy style and protects pipes from the elements
- SellingPoint10: 1/8-NPT port in cold-side pipe for methanol injection or additional sensors
- SellingPoint11: Includes Mishimoto Silicone Boots with DuraCore technology for superior resistance to heat, pressure, fuel, and oil
- SellingPoint12: Constant-tension worm gear clamps keep a strong grip as pipes expand and contract
- SellingPoint13: US Patent Pending
- SellingPoint14: Mishimoto Lifetime Warranty
- SellingPoint15: N/A
- TechSpec Applications: 2021+ Ford Bronco V6 2.7L Turbo
- TechSpec Engine Codes: 2.7L EcoBoost
- TechSpec Chassis Codes: U725
- TechSpec Maximum Recommended Boost Pressure (PSI): 50
- TechSpec Maximum Recommended Horsepower: 1000
- TechSpec Overall Length (in): N/A
- TechSpec Overall Height (in): N/A
- TechSpec Overall Width (in): N/A
- TechSpec Core Type: N/A
- TechSpec Core Thickness (in): N/A
- TechSpec Core Length (in): N/A
- TechSpec Core Height (in): N/A
- TechSpec Inlet (in): N/A
- TechSpec Outlet (in): N/A
- TechSpec Weight (lbs): 20.3
- TechSpec Note: N/A
- TechSpec Includes: (4) Hot Side Intercooler Pipes--(2) Cold-Side Intercooler Pipes--(7) Intercooler Pipe Boots--(18) Heavy-Duty Stainless-Steel Worm gear Clamps--(2) CNC-Machined Intercooler Quick-Disconnect Adapters--Mishimoto Lifetime Warranty
- TechSpec Installation Notes: N/A
- TechSpec Pipe Shape: N/A
- TechSpec Pipe Diameter: N/A
- TechSpec Pipe Length: N/A
- TechSpec Centerline Radius: N/A
- Install Difficulty: 2
Notes:
The Bronco is back, and with two powerful turbocharged engines, it was born to run free. The larger of the two EcoBoost engines, the 2.7L twin-turbo V6, cranks out 330 horsepower and 325 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn?t want more from their vehicle? We here at Mishimoto are never ones to settle for stock, so that?s why we?ve developed these performance intercooler pipes for your 2021+ Ford Bronco 2.7L EcoBoost.----Our intercooler pipes are constructed from cast and mandrel-bent aluminum for unsurpassed durability. Unlike the stock plastic pipes, our cast-aluminum hot-side Y-pipe and throttle body inlet provide superior resistance to cracking after thousands of heat cycles. For even more durability, we?ve replaced the factory rubber sections with mandrel-bent aluminum for significantly increased boost tolerance. Serrated coupler connections at the Y-pipe and throttle body ensure your boost stays where you want it under even the most extreme conditions.----But durability isn?t the only benefit these pipes offer. The Mishimoto performance intercooler pipes reduce restriction by up to 34.2-percent over the stock pipes. That increase in flow allows your Bronco to pull in more air for power gains of over 5 HP and 6.1 lb-ft. of torque on the stock tune.----If you?re ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, these Mishimoto Performance Intercooler Pipes are for you. And, like all Mishimoto products, they?re backed by our Lifetime Warranty, so you can drive easy knowing we?ve got you covered.
Performance Intercooler Pipe Kit, Fits Ford Bronco 2.7L EcoBoost 2021+
Features
- SellingPoint01: Direct fit for 2021+ Ford Bronco 2.7L EcoBoost
- SellingPoint02: Up to 34.2-percent less restrictive than stock pipes
- SellingPoint03: Dyno-proven power gains of 5.4 HP and 6.1 lb-ft. of torque on stock tune
- SellingPoint04: 2-1/4-inch to 2-1/2-inch hot-side piping and 2-3/4-inch cold-side piping
- SellingPoint05: Available with high-mount or stock location intercooler for improved cooling and power
- SellingPoint06: Constructed from durable cast and mandrel-bent aluminum for superior boost tolerance
- SellingPoint07: Serrated coupler connections ensure a secure fit under high boost pressures
- SellingPoint08: Precision CNC-machined components for exacting fit and performance
- SellingPoint09: Micro-wrinkle black powder coat adds stealthy style and protects pipes from the elements
- SellingPoint10: 1/8-NPT port in cold-side pipe for methanol injection or additional sensors
- SellingPoint11: Includes Mishimoto Silicone Boots with DuraCore technology for superior resistance to heat, pressure, fuel, and oil
- SellingPoint12: Constant-tension worm gear clamps keep a strong grip as pipes expand and contract
- SellingPoint13: US Patent Pending
- SellingPoint14: Mishimoto Lifetime Warranty
- SellingPoint15: N/A
- TechSpec Applications: 2021+ Ford Bronco V6 2.7L Turbo
- TechSpec Engine Codes: 2.7L EcoBoost
- TechSpec Chassis Codes: U725
- TechSpec Maximum Recommended Boost Pressure (PSI): 50
- TechSpec Maximum Recommended Horsepower: 1000
- TechSpec Overall Length (in): N/A
- TechSpec Overall Height (in): N/A
- TechSpec Overall Width (in): N/A
- TechSpec Core Type: N/A
- TechSpec Core Thickness (in): N/A
- TechSpec Core Length (in): N/A
- TechSpec Core Height (in): N/A
- TechSpec Inlet (in): N/A
- TechSpec Outlet (in): N/A
- TechSpec Weight (lbs): 20.3
- TechSpec Note: N/A
- TechSpec Includes: (4) Hot Side Intercooler Pipes--(2) Cold-Side Intercooler Pipes--(7) Intercooler Pipe Boots--(18) Heavy-Duty Stainless-Steel Worm gear Clamps--(2) CNC-Machined Intercooler Quick-Disconnect Adapters--Mishimoto Lifetime Warranty
- TechSpec Installation Notes: N/A
- TechSpec Pipe Shape: N/A
- TechSpec Pipe Diameter: N/A
- TechSpec Pipe Length: N/A
- TechSpec Centerline Radius: N/A
- Install Difficulty: 2