Timbren 2002 Dodge Ram 1500 RWD Rear Suspension Enhancement System - DR2500CA
This SES Suspension Upgrade fits the rear suspension of a Dodge Ram 1500 & 2500 pickup truck. Each laser cut piece of steel is precision bent and powder-coated to ensure a quality fit. We've engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs the harder they work to prevent rear end sag. Whether you're pulling a trailer or carrying a heavy load in the bed of your truck, our hollow rubber springs adjust automatically to keep the vehicle level at all times.
This SES Suspension Upgrade replaces the jounce stop on the frame. Its unique design ensures superb ride quality ? loaded or unloaded. (There should be a 1/2' to 1 1/2' gap between rubber spring and axle to ensure unloaded ride quality.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.
DR2500CA replaces the bumpstops on the rear suspension of the 2003-2013 RAM 2500 2WD and 4WD pickup truck models. For a complete listing please refer to the FITMENT tab below.
This kit is rated at 6000 lbs capacity. Even though you're increasing the spring rate by adding this upgrade, this does not increase the GVWR (Gross Vehicle Weight Rating). Please make sure that the load does not exceed the GVWR set by the manufacturer.
Features:
- Eliminate Vehicle Squatting & Sagging
- Cushion Road Shocks
- Improve Handling
- Satisfaction Guarantee
- Lifetime Warranty
- Rated for 6000lbs
- Kit height without 1' spacer = 6.35'
- Kit height with 1' spacer = 7.35'
- 2x Aeon hollow rubber springs
- 2x 1' rubber spacers
- 2x Steel mounting brackets
- All necessary hardware
- Dodge Ram 1500 2wd | 4wd 2003-2008
- Dodge Ram 2500 2wd | 4wd 2010
- RAM 2500 2wd | 4wd 2011-2013
This SES Suspension Upgrade fits the rear suspension of a Dodge Ram 1500 & 2500 pickup truck. Each laser cut piece of steel is precision bent and powder-coated to ensure a quality fit. We've engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs the harder they work to prevent rear end sag. Whether you're pulling a trailer or carrying a heavy load in the bed of your truck, our hollow rubber springs adjust automatically to keep the vehicle level at all times.
This SES Suspension Upgrade replaces the jounce stop on the frame. Its unique design ensures superb ride quality ? loaded or unloaded. (There should be a 1/2' to 1 1/2' gap between rubber spring and axle to ensure unloaded ride quality.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.
DR2500CA replaces the bumpstops on the rear suspension of the 2003-2013 RAM 2500 2WD and 4WD pickup truck models. For a complete listing please refer to the FITMENT tab below.
This kit is rated at 6000 lbs capacity. Even though you're increasing the spring rate by adding this upgrade, this does not increase the GVWR (Gross Vehicle Weight Rating). Please make sure that the load does not exceed the GVWR set by the manufacturer.
Features:
- Eliminate Vehicle Squatting & Sagging
- Cushion Road Shocks
- Improve Handling
- Satisfaction Guarantee
- Lifetime Warranty
- Rated for 6000lbs
- Kit height without 1' spacer = 6.35'
- Kit height with 1' spacer = 7.35'
- 2x Aeon hollow rubber springs
- 2x 1' rubber spacers
- 2x Steel mounting brackets
- All necessary hardware
- Dodge Ram 1500 2wd | 4wd 2003-2008
- Dodge Ram 2500 2wd | 4wd 2010
- RAM 2500 2wd | 4wd 2011-2013